Found 78 Products For:

"seamless boiler tubes"

ASTM A179 Carbon Steel Wound L Finned Tubes For Industrial Condensers and Air Coolers

ASTM A179 Carbon Steel Wound L Finned Tubes For Industrial Condensers and Air Coolers What is the L finned tubes? How did this L process come into being and what about advantages of this type? *Wound L finned tubes is one type of finned tubes, this type of finned tubes are widely used in industries requiring efficient heat exchange with gas/air-side media. *Fin Structure: L-shaped fin wound and fixed on base tube (high-frequency welding or tension winding process). *A179

ASTM A179 Extruded Finned Tubes for Waste Heat Recovery in Low-Temperature Environments

ASTM A179 Extruded Finned Tubes for Waste Heat Recovery in Low-Temperature Environments ASTM A179 extruded finned tubes feature high thermal conductivity, low manufacturing costs, and robust fin-to-tube bonding, these tubes are tailored for low-temperature waste heat recovery (WHR) systems operating at 60400C. They efficiently capture low-grade heat from flue gas, process fluids, or industrial wastewater, serving as a cost-effective solution for energy-saving retrofits in

ASME SA179 Carbon Steel Wound L Finned Tubes Al1060 Fins For Industrial Boiler Economizer

ASME SA179 Carbon Steel Wound L Finned Tubes Al1060 Fins For Industrial Boiler Economizer What is the L finned tubes? *Wound L finned tubes this type of finned tubes are widely used in industries requiring efficient heat exchange with gas/air-side media. L-shaped fin wound and fixed on base tube (high-frequency welding or tension winding process). *ASME SA179 CS L type finned tubes + AL1060 fins this is a high-efficiency heat transfer component specifically designed for

SA209 T1 Carbon Molybdenum Alloy Steel Embedded G Finned Tubes With Al1060 Fins

SA209 T1 Carbon Molybdenum Alloy Steel Embedded G Finned Tubes With Al1060 Fins These are embedded G-type finned tubes manufactured by mechanically locking the pre-formed G-profile aluminum fins into the precision-machined grooves on the outer surface of the SA209 T1 carbon-molybdenum alloy steel base tube.The embedded fin design ensures secure mechanical bonding without brazing or welding, suitable for specified temperature and pressure conditions. SA209 T1 carbonmolybdenum

ASTM A179 Tubing Low Carbon Steel Heat Exchanger Tube Cold Drawn Seamless

A179/SA179 Low-Carbon Steel Seamless Tube, Cold-Drawn And Oiled, For Shell-And-Tube Heat Exchanger Overview A179/SA179 Low-Carbon Seamless Tube ASTM A179 / ASME SA179 carbon steel seamless tubes are specifically designed for use in heat exchangers, condensers, and similar heat transfer systems. These tubes are manufactured using a cold-drawn seamless process, providing thin walls, high precision, and excellent heat transfer performance. Made from low carbon steel, they offer

ASTM A192 Carbon Steel Serrated Finned Tubes For Furnace Convection Section Heat Transfer

ASTM A192 Carbon Steel Serrated Finned Tubes For Furnace Convection Section Heat Transfer Chemical Composition (%) Grade C Mn P S Si A192 0.06-0.18 0.27-0.63 0.035 0.035 0.25 Mechanical Properties Grade Tensile Strength,min Yield Strength (0.2%Offset,min) Elongation min% A192 47ksi (325 MPa) 26ksi (180 MPa) 35 The convective section transports water, steam, hot oil or process fluids, and operates under medium-pressure conditions. A192 complies with the ASME Boiler and

ASTM A312 Stainless Steel Seamless TP321H HFW Finned Tubes for Large Heat Transfer Equipment

ASTM A312 Stainless Steel Seamless TP321H HFW Finned Tubes for Large Heat Transfer Equipment ASTM A312 TP321H seamless stainless steel high-frequency welded (HFW) finned tubes are made of titanium-stabilized high-carbon austenitic stainless steel as the base material, combined with the high-efficiency HFW finning process. They are mainly applied in heat transfer systems operating under high temperatures ranging from 427C to 816C, corrosive conditions, and thermal cycling

ASME / ASTM SA179 / A179 Seamless Carbon Steel Air Cooler Tube , For Oil and Gas Industry

ASME / ASTM SA179 / A179 Seamless Carbon Steel Air Cooler Tube , For Oil and Gas Industry 1. Standard and Specification ASME SA179 is a specification established by the American Society of Mechanical Engineers (ASME) for seamless carbon steel tubes primarily intended for boiler and heat exchanger applications. It defines the chemical composition, mechanical properties, dimensions, and testing requirements for seamless carbon steel tubes to ensure reliability and safety under

ASTM A268 TP410 Seamless Stainless Steel Heat Exchanger Tube , For Oil and Gas Industry

ASTM A268 TP410 Seamless Stainless Steel Heat Exchanger Tube , For Oil and Gas Industry ASTM A268 specifies the standard for seamless and welded ferritic stainless steel tubes used for high-temperature service and other applications requiring corrosion resistance. Type TP410 is a martensitic grade stainless steel known for its excellent mechanical strength and resistance to heat, making it ideal for use in heat exchanger applications. Key Features of ASTM A268 TP410 Tube

2 3 4 5 6 Next