ASME U Stamp Shell and Tube Heat Exchanger Stacked U Tube Bundle SA213 T5 untuk LPG

Tempat asal: Cina
Nama merek: YUHONG
Sertifikasi: ASME VIII Div. 1, PED/97/23/CE, TEMA R, TEMA C, TEMA B
Nomor model: Penukar Panas Tipe Tumpukan
Kuantitas min Order: 1 Set
Harga: Depend on drawing
Kemasan rincian: Ply-wooden case / besi / bundel dengan tutup plastik dll.
Waktu pengiriman: 20-80 hari
Syarat-syarat pembayaran: T/t, l/c, d/a
Menyediakan kemampuan: 60 set/bulan
Kirim Sekarang
Dapatkan Kutipan
Spesifikasi
Fitur-fitur Utama

Tabung penukar panas tipe tumpukan

,

Pertukaran panas ASME SA213 T5

,

Tabung penukar panas unit LPG

Kerang:
ASME SA387 GR.5 CL.2
Kepala:
ASME SA387 GR.5 CL.2
Nozel:
ASME SA335 P5
Saluran:
ASME SA387 GR.5 CL.2
Baffles:
ASME SA387 GR.5 CL.2
Flens:
ASME SA182 F5
Tubesheet:
ASME SA336 F5A
Mendukung:
ASME SA516 GR.60
Deskripsi Produk

ASME U Stamp Shell and Tube Heat Exchanger Stacked U Tube Bundle SA213 T5 untuk LPG

YUHONG ditumpuk Shell-and-tube Panas penukar dirancang untukSatuan LPG (Gas Petroleum Cairan)danSistem Boiler. Sesuai dengan standar internasional (ASME, TEMA) untuk transfer panas yang dapat diandalkan dalam lingkungan hidrokarbon korosif bertekanan tinggi.


Spesifikasi teknis (Ruang Tekanan)Aku tidak tahu.

ParameterAku tidak tahu.
Sisi KerangAku tidak tahu.
Sisi tabungAku tidak tahu.
Tekanan kerja yang diizinkan (G)
25 kgf/cm2 (2,45 MPa) pada 275°C
370,5 kgf/cm2 (3,67 MPa) pada 225°C
Tekanan operasi (G)
40,9 kgf/cm2 (0,47 MPa) pada 247°C
240,6 kgf/cm2 (2,4 MPa) pada 199°C
Tekanan desain (G)
25 kgf/cm2 (2,45 MPa)
37.5 kgf/cm2 (3,67 MPa)
Suhu Desain
275°C
225°C
Min. Suhu Desain Logam
+1°C
+1°C
Tekanan pengujian hidrostatik (horisontal)
330,96 kgf/cm2 (3,33 MPa)
480,74 kgf/cm2 (4,78 MPa)
Tekanan pengujian pneumatik (Kerah)
0.6 kgf/cm2 (0,06 MPa)
0.6 kgf/cm2 (0,06 MPa)
Min. Tekanan Temperatur Tes Logam
5°C
5°C
Nama cairan
Minyak Gas Ringan
Minyak mentah yang tidak terlarut
Toksisitas
No/NE
No/NE
Mudah terbakar
Ya/NO
Ya/NO
Bahan peledak
Ya/NO
Ya/NO
Izin Korosi
3 mm
3 mm
Volume Ruang Tekanan
3.217 m3
1.973 m3


Sistem LukisanAku tidak tahu.

DeskripsiAku tidak tahu.
Persiapan PermukaanAku tidak tahu.
Pelapis primerAku tidak tahu.
Permukaan luar sisi cangkang (termasuk nozel) Sistem cat 3
Sa 2 1/2 (ISO 8501-1)
INTERZINC 22: 1 × 75 μm, 1 × 25 m2
Permukaan luar pelanaSistem cat 1
Sa 2 1/2 (ISO 8501-1)


Intercure 200: 1 × 100 μm, 1 × 8 m2


Bahan & AplikasiAku tidak tahu.

  • Bahan tabung: ASME SA213 T5 (untuk aplikasi LPG/boiler bertekanan tinggi dan suhu tinggi)
  • Aplikasi: Dioptimalkan untuk Unit LPG (Light Gas Oil) dan Sistem Boiler (Oil mentah desalted)Aku tidak tahu.

Pengelasan:

  • Efisiensi sendi las (Lonjang / Lingkaran): 1
  • Kriteria penerimaan (kecacatan): UW 51 (ASME)
  • Spesifikasi prosedur pengelasan: ASME Sec. IX
  • Kualifikasi Las: ASME Sec. IX

    Dukungan Teknik & Layanan Proyek Global:

    Untuk verifikasi desain ASME khusus, perhitungan termal HTRI, atau pemrosesan RFQ mendesak, insinyur penjualan utama kamiMax Zhang (Yuhong Group)memberikan bantuan teknis langsung.

    • Direct Line / WhatsApp:+86-153-8196-4640

    • Surat Teknik:max [di] steelseamlesspipe [titik] com

    • Portal Spesifikasi Resmi:www [dot] tema-heatexchanger [dot] com

Aku tidak tahu.ASME U Stamp Shell and Tube Heat Exchanger Stacked U Tube Bundle SA213 T5 untuk LPG
Peringkat Umum
4.0
Berdasarkan Ulasan Terbaru
Cuplikan Penilaian
5
33%
4
33%
3
33%
2
0
1
0
Semua Ulasan
M
Mateo Rossi dari Argentina
Jan 21.2026
In our industry, downtime is a killer. This exchanger has been low-maintenance and highly reliable for our biodiesel flow. The ASME certification gives our insurance team peace of mind.
A
A*d dari Saudi Arabia
Dec 29.2025
We installed this heat exchanger at our petrochemical facility in Jubail Industrial City back in March. The ASME VIII-1 certification was non-negotiable for us, and this unit delivered exactly what we needed. The SA516 Gr485 shell material has held up exceptionally well against our high-temperature process streams, even during the peak summer months when ambient temperatures exceed 45°C. What impressed me most was the quality of the welding—our inspection team did radiography testing on random seams, and all passed with flying colors. The supplier kept us updated throughout fabrication with photos and progress reports, which built a lot of trust. We've had zero leaks or performance issues since startup. Definitely planning to order another unit for our expansion project next year.
A
A*i dari United Arab Emirates
Jul 15.2025
Delivery was smooth—the unit arrived at Jebel Ali port within the promised timeframe, and the packaging protected it from the dusty environment during transport. Installation was quick because all flange alignments were perfect.
Produk terkait
Kirim Pertanyaan