"induced draft air cooled heat exchanger"

Forced Draught Air Cooled Heat Exchanger API 661 For Petroleum Industry Forced Draught Air Cooled Heat Exchanger with API 661, Petroleum Industry Selection of Induced Draught or Forced Draught The air-cooled heat exchanger shall be either a forced-draught exchanger or an induced-draught exchanger and shall include the components shown in Figure 1 and any auxiliaries such as ladders, walkways and platforms. Forced-draught fans should be used, except that induced-draught fans

​​ASME U Stamp Certified Air Cooler, SA249 TP304L Tubes, Forced Draft Fan for Petrochemical Service The air-cooled heat exchanger shall be either a forced-draught exchanger or an induced-draught exchanger. For forced-draught exchanger, exchanger designed with the tube bundles located on the discharge side of the fan. Typical Components of an Air-cooled Heat Exchanger 1 tube bundle 2 header 3 nozzle 4 supporting column 5 plenum 6 fan 7 fan ring 8 fan deck 9 drive assembly 10

لوله های فولادی کربنی ASME SA179 با باله های تعبیه شده نوع G-Al1060 برای منطقه انتقال حرارت 5-10×. دارای گواهینامه ASME U-Stamp، API 661، PED. اندازه‌ها، پیکربندی‌ها و پوشش‌های سفارشی برای برنامه‌های خنک‌کننده هوا در دمای بالا موجود است.