Found 65 Products For:

"pressure vessel nozzle"

SA105N Zelfversterkte drukvatsnozel voor hoge drukomgeving

SA105N Self-Reinforced Nozzle: Pressure Vessel & Piping Part What is Self-Reinforced Nozzle? Self-Reinforced Nozzle is a specialized type of nozzle used in pressure vessels, heat exchangers, and other industrial equipment. It is designed with an integrated reinforcement structure that eliminates the ...

ASME SA182 F11 Zelfversterkte Spuitmond Hoge Temperatuur Drukvat Componenten

ASME SA182 F11 Self-Reinforced Nozzle: High-Temp Pressure Vessel Part ASME SA182 F11 Self-Reinforced Nozzle is a critical high-pressure/high-temperature (HP/HT) component used in boilers, reactors, and power/petrochemical systems. It integrates reinforcement directly into the nozzle forging, ...

Persoonlijke ASME SA-516 drukvat van klasse 70 met HIC/SSC-weerstand voor toepassingen in zuurdiensten van 25 MPa

ASME VIII U-gestempelde drukvaten van koolstofstaal voor zure olie en gas. Bestand tegen HIC/SSC-scheuren, werkt tot 25 MPa, -46°C tot 350°C. Volledige NACE-conformiteit met Charpy-impacttests en volledige NDT-documentatie.

BS EN 13445 Onbevlekte Drukvaten Shell-and-Tube Warmtewisselaar Buisbundel

BS EN 13445 Unfired Pressure Vessels Shell and Tube Heat Exchanger Tube Bundle Yuhong is a trusted manufacturer and supplier of high-quality shell and tube heat exchanger tube bundles, specializing in products designed for industrial applications such as oil and gas, petrochemical, chemical ...

SA350 GR.LF2 CL1 Zelfversterkte Spuitmond Lage Temperatuur Drukvat Onderdelen

SA350 GR.LF2 CL1 Self-Reinforced Nozzle: Low-Temp Pressure Vessel Part 1. Introduction The ASME SA350 GR.LF2 CL.1 Self-Reinforced Nozzle is a high-integrity forged steel component used in pressure vessels and piping systems operating at cryogenic temperatures (down to -46°C/-50°F ). Its integral ...

ASME BPVC Sectie VIII Div.1 SA182 F11 Klasse 2 Zelfversterkte (SRN) Spuitstuk

ASME BPVC Section VIII Div.1 SA182 F11 Class 2 Self Reinforced (SRN) Nozzle The SA182 F11 Class 2 Self-Reinforced Nozzle is a critical component in high-temperature and high-pressure systems. Its robust design, excellent mechanical properties, and resistance to harsh environments make it suitable ...

ASME SA105N SRN Koolstofstaal spuitstuk in drukvat 273,7 mm Diameter DN250

ASME SA105N SRN Self Reinfored Carbon Steel Nozzle for Pressure Vessels With an annual production capacity of 6,000+ tons, Yuhong Holding Group Co., Ltd. delivers high-quality pressure vessels and components, including thin-film evaporators, heat exchangers, reactors, towers, storage tanks, and ...

NACE MR103 SS Goedkeuring van drukvaten voor amine-reflux met anti-corrosieve U-stempel

Pressure Vessels for Amine Reflux Vessels: Design & Considerations Amine reflux vessels are pressure vessels designed to handle condensed liquids (water + amine) and residual acid gases (H₂S, CO₂) from the overhead of an amine stripper column. Their design follows strict standards due to corrosive ...

Glycol Flash Vat ASME Drukvat Roestvrij Staal SA240 SS304 Bekledingsmateriaal

Glycol Flash Vessel (Pressure Vessel) ASME Standards Stainless Steel SA240 S.S. 304/Cladding Material SA516 GR.60/70 With Stainless steel cladding A Glycol Flash Vessel is a critical component in natural gas processing systems, particularly in glycol dehydration units. Its primary purpose is to ...

1 2 3 4 5 Volgende.