迅速な連絡
住所
20階,新世界ビル1号,ミナン道路1018号,インズォー地区,寧波,中国,郵便番号:315040
Tel
0086-574-88013900
私たちのニュースレター
ニュースレターを購読して、割引などを入手してください。
By the Yuhong Group technical team
In the fabrication of industrial storage tanks, agricultural storage bins, and liquid containers, galvanized steel plates are the preferred material due to their exceptional corrosion resistance and cost-efficiency. However, the very zinc coating that protects the container from rust creates significant challenges during the welding process. Fabricators frequently struggle with weld failures that can compromise the seal and lead to leaks.
At Yuhong Group, we supply high-quality galvanized steel plates and structural steel pipes specifically engineered for tank and container manufacturing. This article outlines the critical welding challenges in storage tank fabrication and the proven methods to solve them.
When constructing a storage tank or box, the weld seam must be perfectly sealed. However, the zinc coating (melting point ~419°C) vaporizes long before the steel (melting point ~1500°C) melts.
To ensure a leak-proof storage tank or box, pre-weld preparation is mandatory:
SMAW is highly effective for on-site repairs or fabricating smaller storage boxes. It generates less dust than gas welding.
Electrode Selection:
Technique: Use a short arc without oscillating the electrode to protect the zinc layer and minimize fume generation.
For large-scale tank shells, GMAW (CO2, Ar+CO2, or Ar+O2) offers much higher efficiency. Pure CO2 yields a higher Zn content in the weld, while Ar+CO2 mixtures reduce it.
Using ER70S-3 wire, diameter 0.9 mm, dry extension 6.4 mm.
Table 1: Butt Joint (Tank Shell) CO2 Welding Parameters
| Thickness (mm) | Gap (mm) | Welding Position | Wire Feed Speed (mm/s) | Arc Voltage (V) | Welding Current (A) | Welding Speed (mm/s) |
|---|---|---|---|---|---|---|
| 1.6 | 0 | Flat | 59.2~80.4 | 17~20 | 70~90 | 5.1~7.2 |
| 3.2 | 0.8~1.5 | Flat | 71.9 | 20 | 135 | 5.5 |
Table 2: Lap Joint (Container Flanges) CO2 Welding Parameters
| Thickness (mm) | Welding Position | Wire Feed Speed (mm/s) | Arc Voltage (V) | Welding Current (A) | Welding Speed (mm/s) |
|---|---|---|---|---|---|
| 1.6 | Flat | 50.8 | 19 | 110 | 5.1~6.8 |
| 3.2 | Flat | 67.2 | 19 | 135 | 3.8~4.2 |
Achieving high-quality welds starts with the right material. At Yuhong Group, we specialize in supplying premium galvanized steel plates, seamless pipes, and structural profiles tailored for the storage tank and container industry. We offer flexible MOQ (1 Ton), competitive FOB pricing, and a reliable Lead Time (15-25 days) to keep your fabrication schedule on track. Contact our technical team today to discuss your tank manufacturing requirements and get a fast quotation.
Yes, galvanized steel is highly corrosion-resistant. However, the zinc coating must be carefully removed at the weld seams to prevent porosity, which could lead to leaks in the storage tank.
Prevent cracks by opening proper grooves, removing the zinc layer via sandblasting, keeping the gap around 1.5 mm, and selecting low-silicon (Si) welding materials.
GMAW (CO2 gas shielded welding) is generally more efficient for large tank shells due to its higher deposition rate. SMAW is better for smaller bins and on-site repairs because it produces less dust.
The zinc coating evaporates into harmful ZnO dust during welding. In enclosed spaces like storage bins, proper ventilation is mandatory to protect workers' respiratory systems.
Author: Yuhong Group Technical Team — welding & fabrication specialists for galvanized steel plates, seamless pipes and structural profiles used in storage tanks, silos and liquid containers.
Reviewed by the Yuhong Group engineering department. For technical consultation and quotations, contact our sales team.
