Found 35 Products For:

"finned pipe"

ASTM A335 P22 หลอดปีกสไพร่ผ่าตัดความถี่สูงสําหรับเครื่องแลกเปลี่ยนความร้อนและเครื่องปั่น

ASTM A335 P22 High Frequency Welded Serrated Spiral Fin Tube This high-performance engineered component is designed for superior heat transfer in extreme operating environments. It integrates the excellent high-temperature mechanical properties of ASTM A335 Grade P22 alloy steel with an advanced finned design for enhanced heat exchange efficiency. Product Overview The base tube is manufactured from seamless ferritic alloy-steel pipe specifically intended for high-temperature

ASTM A106 Gr.B Tube With Cu-T2 Fin with Embedded Fin Tube with G-type

ASTM A106 Gr.B Tube With Cu-T2 Fin with Embedded Fin Tube G-Type Inlay fin tubes, also known as G-fin tubes, are manufactured by mechanically wrapping fin material around a base tube. Their key feature is that the fin legs are embedded into the base tube surface under tension, forming a tight mechanical and metallurgical bond without the need for any filler material. The combination of a sturdy carbon steel base tube and highly thermally conductive copper fins provides a

ASTM A335 P9 หลอดขีดขีดขีดขีดเหล็กสแตนเลสสําหรับเครื่องอบอุ่นอากาศระบายน้ําอุ่นสูง

ASTM A335 P9 Alloy Steel Serrated Finned Tubes For High Temperature Boiler Superheaters Chemical Composition (%) Grade C Mn P S Si Cr Mo P9 0.15max 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 Mechanical Properties Grade Tensile Strength,min Yield Strength (0.2%Offset,min) Elongation min% P9 60ksi (415 MPa) 30ksi (205 MPa) 30 ASTM A335 P9 (12Cr9Mo) is a 9%Cr - 1%Mo ferroalloy designed for high-temperature (up to 650°C) and high-pressure (up to 16 MPa) service. It is a

ท่อครีบเชื่อมแบบไร้รอยต่อเหล็กอัลลอย ASTM A335 P22 HFW สำหรับเตาอุตสาหกรรมปิโตรเคมี

ASTM A335 Alloy Steel Seamless P22 HFW Finned Tubes for Petrochemical Industrial Furnace HFW (High-Frequency Welded) denotes the advanced welding process used to bond fins tightly to the base tube, ensuring superior structural integrity and thermal conductivity. These finned tubes are designed to maximize heat transfer efficiency in harsh petrochemical environments involving high temperatures, high pressures, and corrosive flue gases. High-frequency welding creates a uniform,

ท่อครีบสแตนเลส ASTM A312 TP304 แบบหยักสำหรับซุปเปอร์ฮีตเตอร์ในระบบกู้คืน

ASTM A312 Stainless Steel TP304 Serrated Finned Tubes For Superheaters In Recovery Systems ASTM A312 TP304 serrated finned tubes are high-performance heat transfer components specifically engineered for superheater assemblies in industrial heat recovery systems. These tubes integrate the superior material properties of TP304 austenitic stainless steel with the enhanced thermal efficiency of a serrated fin geometry, creating an optimal solution for recovering waste heat from

ASTM A335 P11 หลอดไบเลอร์ หลอดเหล็กสแตนเลส Cr-Mo สําหรับเครื่องอบอุ่นและเครื่องแลกเปลี่ยนความร้อน

ASTM A335 P11 Boiler Tube Cr-Mo Alloy Steel Pipe for Superheater And Heat Exchanger ASTM A335 P11 steel pipes are a well-known standard and material for boiler tubes. Certain components in boilers operate under high temperature and pressure, such as superheaters, reheaters, main steam piping, and headers. The properties of P11 material perfectly meet the requirements of these critical components. It maintains sufficient strength even under the high temperatures of boiler

ASME B163 N04400 G ประเภท Fin Tube Monel 400 กับ Aluminium FIN สําหรับเครื่องปรับอากาศ

ASME B163 N04400 G Type Fin Tube Monel 400 Tube with Aluminium FIN For Air Conditing ASME B16.3 N04400 G Type Fin Tube is a type of finned tube made from Monel 400 material with aluminum fins. Monel 400 is a nickel-copper alloy known for its excellent corrosion resistance in various environments, including seawater. The addition of aluminum fins to the tube increases the surface area, allowing for better heat transfer. This type of finned tube is commonly used in applications

วิดีโอ

ท่อครีบหยักเชื่อมความถี่สูง T22 สำหรับการผลิตไอน้ำกลับคืนความร้อนของโรงไฟฟ้า

T22 High Frequency Weld Serrated Finned Tube For Power Plant Heat Recovery Steam Generation YUHONG T22 High-Frequency Welded Serrated Finned Tubes are specifically designed for Heat Recovery Steam Generators (HRSG) in power plants. These tubes offer superior heat transfer performance and durability, making them ideal for recovering waste heat and improving thermal efficiency. In addition to finned tubes, we also provide manifolds, straight tubes, and tube supports, ensuring a

กิ๊บแลกเปลี่ยนความร้อน | ส่วนท่อคู่ / กิ๊บหลายท่อ | Single Pass U-Bundle | วัสดุ: CS/304/316L/Ti | อุณหภูมิการออกแบบ -40°C ถึง +500°C

Hairpin Heat Exchanger | Double Pipe Section / Multitube Hairpin | Single Pass U-Bundle Materials: CS/304/316L/Ti | Design Temp -40°C to +500°C | Applications: High ΔT Services / Vaporizing / Gas Heating | Manufactured per TEMA or ASME VIII-1 Technical Advantage Overview The hairpin heat exchanger (also known as a double-pipe or multitube hairpin) is engineered for services where thermal expansion differential between the tube and shell fluids exceeds the practical limit of a

1 2 3 4 ถัดไป