Found 35 Products For:

"finned pipe"

Tube à ailettes en spirale dentelée soudée à haute fréquence ASTM A335 P22 pour échangeurs de chaleur et chaudières

ASTM A335 P22 High Frequency Welded Serrated Spiral Fin Tube This high-performance engineered component is designed for superior heat transfer in extreme operating environments. It integrates the excellent high-temperature mechanical properties of ASTM A335 Grade P22 alloy steel with an advanced finned design for enhanced heat exchange efficiency. Product Overview The base tube is manufactured from seamless ferritic alloy-steel pipe specifically intended for high-temperature

ASTM A106 Gr.B Tube With Cu-T2 Fin with Embedded Fin Tube with G-type

ASTM A106 Gr.B Tube With Cu-T2 Fin with Embedded Fin Tube G-Type Inlay fin tubes, also known as G-fin tubes, are manufactured by mechanically wrapping fin material around a base tube. Their key feature is that the fin legs are embedded into the base tube surface under tension, forming a tight mechanical and metallurgical bond without the need for any filler material. The combination of a sturdy carbon steel base tube and highly thermally conductive copper fins provides a

ASTM A335 P9 Tubes à nageoires serrées en alliage d'acier pour chaudières à haute température

ASTM A335 P9 Alloy Steel Serrated Finned Tubes For High Temperature Boiler Superheaters Chemical Composition (%) Grade C Mn P S Si Cr Mo P9 0.15max 0.30-0.60 0.025 0.025 0.25-1.00 8.00-10.00 0.90-1.10 Mechanical Properties Grade Tensile Strength,min Yield Strength (0.2%Offset,min) Elongation min% P9 60ksi (415 MPa) 30ksi (205 MPa) 30 ASTM A335 P9 (12Cr9Mo) is a 9%Cr - 1%Mo ferroalloy designed for high-temperature (up to 650°C) and high-pressure (up to 16 MPa) service. It is a

Tubes à aileron P22 HFW sans soudure en acier allié ASTM A335 pour four industriel pétrochimique

ASTM A335 Alloy Steel Seamless P22 HFW Finned Tubes for Petrochemical Industrial Furnace HFW (High-Frequency Welded) denotes the advanced welding process used to bond fins tightly to the base tube, ensuring superior structural integrity and thermal conductivity. These finned tubes are designed to maximize heat transfer efficiency in harsh petrochemical environments involving high temperatures, high pressures, and corrosive flue gases. High-frequency welding creates a uniform,

Tubes à ailettes crantées en acier inoxydable ASTM A312 TP304 pour surchauffeurs dans les systèmes de récupération

ASTM A312 Stainless Steel TP304 Serrated Finned Tubes For Superheaters In Recovery Systems ASTM A312 TP304 serrated finned tubes are high-performance heat transfer components specifically engineered for superheater assemblies in industrial heat recovery systems. These tubes integrate the superior material properties of TP304 austenitic stainless steel with the enhanced thermal efficiency of a serrated fin geometry, creating an optimal solution for recovering waste heat from

Tuyau d'acier allié Cr-Mo de tube de chaudière d'ASTM A335 P11 pour le surchauffeur et l'échangeur de chaleur

ASTM A335 P11 Boiler Tube Cr-Mo Alloy Steel Pipe for Superheater And Heat Exchanger ASTM A335 P11 steel pipes are a well-known standard and material for boiler tubes. Certain components in boilers operate under high temperature and pressure, such as superheaters, reheaters, main steam piping, and headers. The properties of P11 material perfectly meet the requirements of these critical components. It maintains sufficient strength even under the high temperatures of boiler

ASME B163 N04400 G Type de tube à aileron Monel 400 avec aileron en aluminium pour la climatisation

ASME B163 N04400 G Type Fin Tube Monel 400 Tube with Aluminium FIN For Air Conditing ASME B16.3 N04400 G Type Fin Tube is a type of finned tube made from Monel 400 material with aluminum fins. Monel 400 is a nickel-copper alloy known for its excellent corrosion resistance in various environments, including seawater. The addition of aluminum fins to the tube increases the surface area, allowing for better heat transfer. This type of finned tube is commonly used in applications

Qualité Tube à ailettes dentelées soudées à haute fréquence T22 pour la production de vapeur par récupération de chaleur en centrale électrique usine

Vidéo

Tube à ailettes dentelées soudées à haute fréquence T22 pour la production de vapeur par récupération de chaleur en centrale électrique

T22 High Frequency Weld Serrated Finned Tube For Power Plant Heat Recovery Steam Generation YUHONG T22 High-Frequency Welded Serrated Finned Tubes are specifically designed for Heat Recovery Steam Generators (HRSG) in power plants. These tubes offer superior heat transfer performance and durability, making them ideal for recovering waste heat and improving thermal efficiency. In addition to finned tubes, we also provide manifolds, straight tubes, and tube supports, ensuring a

Qualité Échangeur de chaleur à épingle à cheveux. Section à double tuyau / épingle à cheveux à tubes multiples. Boîte U à passage unique. Matériaux: CS/304/316L/Ti. Température de conception de -40°C à +500°C. usine

Échangeur de chaleur à épingle à cheveux. Section à double tuyau / épingle à cheveux à tubes multiples. Boîte U à passage unique. Matériaux: CS/304/316L/Ti. Température de conception de -40°C à +500°C.

Hairpin Heat Exchanger | Double Pipe Section / Multitube Hairpin | Single Pass U-Bundle Materials: CS/304/316L/Ti | Design Temp -40°C to +500°C | Applications: High ΔT Services / Vaporizing / Gas Heating | Manufactured per TEMA or ASME VIII-1 Technical Advantage Overview The hairpin heat exchanger (also known as a double-pipe or multitube hairpin) is engineered for services where thermal expansion differential between the tube and shell fluids exceeds the practical limit of a

1 2 3 4 Suivant