Nhà > các sản phẩm > ống trao đổi nhiệt >
ASME SA179 A179 Carbon Steel Cold Drawn Steel Heat Exchanger Tube Coil for Industrial Boiler Economizer & Heat Exchanger Systems

ASME SA179 A179 Carbon Steel Cold Drawn Steel Heat Exchanger Tube Coil for Industrial Boiler Economizer & Heat Exchanger Systems

ASME SA179 carbon steel heat exchanger tube

cold drawn steel boiler economizer tube

industrial heat exchanger tube coil

Nguồn gốc:

Trung Quốc

Hàng hiệu:

YUHONG

Chứng nhận:

ISO 9001/TUV/PED

Số mô hình:

ASME SA179 A179

nói chuyện ngay.
Yêu cầu Đặt giá
Chi tiết sản phẩm
Tiêu chuẩn:
ASME SA179
Lớp vật liệu:
A179
hình thức:
ỐNG KHÔNG MỐI NỐI
Đường kính:
3,18-152,4mm
Độ dày của tường:
0,41mm - 25,4mm
Ứng dụng:
Nồi hơi, bộ trao đổi nhiệt, bộ quá nhiệt, HRSG
Làm nổi bật:

ASME SA179 carbon steel heat exchanger tube

,

cold drawn steel boiler economizer tube

,

industrial heat exchanger tube coil

Điều khoản thanh toán và vận chuyển
Số lượng đặt hàng tối thiểu
500 KGS
Giá bán
có thể đàm phán
chi tiết đóng gói
Thùng gỗ khung thép nắp nhựa
Thời gian giao hàng
Phụ thuộc vào số lượng đặt hàng
Điều khoản thanh toán
T/T, L/C trả ngay
Khả năng cung cấp
1000 TẤN / tháng
Mô tả sản phẩm
ASME SA179 A179 Carbon Steel Cold Drawn Steel Heat Exchanger Tube Coil for Industrial Boiler Economizer & Heat Exchanger Systems
 
The core application of A179 material is in economizer tube bundles for power plants/industrial boilers: boiler feedwater flows inside the tubes, while high-temperature flue gas exits from the boiler flows outside.
 
Using the waste heat of the flue gas to preheat the feedwater reduces the exhaust gas temperature, improves boiler efficiency, and brings the feedwater temperature closer to the boiler drum wall temperature, reducing temperature fluctuations.
 
A179 material is resistant to medium temperatures and has good thermal conductivity, making it a classic material for economizers. It is less expensive than stainless steel and suitable for medium- and low-temperature flue gas conditions.
 
Custom-designed economizer tube bundles, made of A179 material and featuring a uniquely shaped coil structure, are specifically designed to recover waste heat from flue gas and heat boiler feedwater. They are key components for improving efficiency in thermal power plants and industrial boilers.

 

 

Chemical Composition
Element Composition (wt%)
Carbon (C) 0.06 – 0.18
Manganese (Mn) 0.27 – 0.63
Phosphorus (P) ≤ 0.035
Sulfur (S) ≤ 0.035
Silicon (Si) ≤ 0.25

 

 

Mechanical Properties
Property Requirement (min.)
Tensile Strength ≥ 325 MPa (47 ksi)
Yield Strength (0.5% extension under load) ≥ 180 MPa (26 ksi)
Elongation (in 2 in / 50 mm) ≥ 35%
Hardness (Rockwell B) ≤ 72 HRB

 

 

Differences between standard U-shaped tubes

 

                      Item                     U-Tube    Serpentine Tube Bundle
                  Structure    Symmetric U-bend, fixed to one tube sheet    Continuous multi-bend/coiled, no common tube sheet
         Application Scenario    Shell-and-tube heat exchangers    Boiler flue gas heating surfaces (economizer/superheater)
               Key Benefit    Thermal stress relief for shell-and-tube units    Maximized heat transfer area & optimal flue duct fit

 

 

 

Application:

  • Boiler Economizers: For power plants and industrial boilers to recover flue gas waste heat.
  • Heat Exchangers: Used in oil & gas, chemical, and food processing industries.
  • Waste Heat Recovery Systems: Maximizing energy efficiency in industrial production lines.

 

ASME SA179 A179 Carbon Steel Cold Drawn Steel Heat Exchanger Tube Coil for Industrial Boiler Economizer & Heat Exchanger Systems 0

 

Đánh giá & Nhận xét

Đánh giá chung

3.7
Dựa trên 50 đánh giá về nhà cung cấp này

Ảnh chụp nhanh về xếp hạng

Sau đây là phân phối của tất cả các xếp hạng
5 sao
0%
4 sao
67%
3 sao
33%
2 sao
0%
1 sao
0%

Tất cả các đánh giá

S
S*r
Germany Feb 10.2026
The normalized state of these flanges is highly uniform. We found no grain issues during subsequent NDT testing, and they fit the shell perfectly.
T
T*i
South Africa Sep 30.2025
Robust construction suitable for our tough operating environment. The vessel handles our coal-to-liquid hydrogenation process with Fischer-Tropsch syncrude—highly corrosive service. The internal cladding overlay (E309L/E347) has shown zero defects after 18 months operation. We appreciate the comprehensive spare parts list and recommended maintenance schedule. The manufacturer even provided on-site supervision during our first catalyst loading. Good value for African market conditions.
P
P*n
North Korea Jun 14.2025
Technical bid included HTRI thermal simulation with fouling factor 0.0002 m²·K/W for our naphtha hydrotreater. SA516 Gr485 + 1.25Cr-0.5Mo tube combination optimized for high-temperature hydrogen sulfide resistance. Delivery EXW Qingdao to CIF Ulsan was 22 days, door-to-door. Zero NCRs during FAT. Korean PM assigned spoke technical English fluently. Already approved for Phase 2 EPC.

Gửi yêu cầu của bạn trực tiếp đến chúng tôi

Chính sách bảo mật Trung Quốc Chất lượng tốt Máy trao đổi nhiệt TEMA Nhà cung cấp. 2025-2026 YUHONG HOLDING GROUP CO., LTD Tất cả các quyền được bảo lưu.