Found 90 Products For:

"carbon steel boiler tube"

Tube de base ASME SA192 avec ailettes en acier au carbone Tube à ailettes crantées pour HRSG

ASME SA192 Serrated Finned Tubes for HRSG Modules Product Overview Serrated finned tubes are widely used in Heat Recovery Steam Generator (HRSG) modules to enhance thermal efficiency in gas turbine combined-cycle power plants. Manufactured using premium-quality ASME SA192 seamless carbon steel tubes, these finned tubes provide an optimized heat transfer surface while maintaining excellent mechanical strength under elevated operating temperatures. The serrated fin design

Tubes à ailettes dentelées en acier au carbone ASTM A192 pour section de convection de four et transfert de chaleur

ASTM A192 Carbon Steel Serrated Finned Tubes For Furnace Convection Section Heat Transfer Chemical Composition (%) Grade C Mn P S Si A192 0.06-0.18 0.27-0.63 0.035 0.035 0.25 Mechanical Properties Grade Tensile Strength,min Yield Strength (0.2%Offset,min) Elongation min% A192 47ksi (325 MPa) 26ksi (180 MPa) 35 The convective section transports water, steam, hot oil or process fluids, and operates under medium-pressure conditions. A192 complies with the ASME Boiler and

Tubes de chaudière sans soudure en acier inoxydable A213 TP321 utilisés à haute température

A213 TP321 Stainless Steel Seamless Boiler Tubes Used In High Temperatures ASTM A213 TP321 is a specification for seamless ferritic and austenitic alloy steel boiler, superheater, and heat-exchanger tubes. TP321 is a titanium-stabilized stainless steel grade that offers excellent resistance to intergranular corrosion and oxidation at high temperatures. These tubes are specifically designed for applications that require high strength, resistance to thermal stress, and

Pour les pièces d'acier inoxydable, les pièces d'acier inoxydable doivent être en acier inoxydable.

ASME SA213 TP304H Bright Annealed Stainless Steel Seamless Tube ASME SA213 TP304H is a high-temperature grade stainless steel belonging to the Austenitic Stainless Steel Family. It is designed for high-temperature applications, specifically in industries like power plants, petrochemicals, chemical processing, and boilers. Bright annealed stainless steel seamless tubing offers enhanced surface finish and improved corrosion resistance, making it an excellent choice for critical

Tube sans soudure en acier allié ASME SA209 / SA209M Gr.T1A pour chaudière, surchauffeur, resurchauffeur

ASME SA209 / SA209M Gr.T1A Alloy Steel Seamless Tube Boiler Tube For Boiler,Superheater,Reheater ASME SA209 Gr.T1A is a seamless carbon-molybdenum alloy steel tube conforming to ASME standards, primarily used for high-temperature pressure components in boilers and superheaters. A key characteristic of this material is the addition of molybdenum, which enhances its strength and creep resistance at high temperatures, making it superior to ordinary carbon steel. This steel tube

Qualité ASME SA335 P91 P92 Tubes de chaudière en acier allié sans soudure, haute température sous pression pour chaudière de centrale électrique, superchauffeur usine

ASME SA335 P91 P92 Tubes de chaudière en acier allié sans soudure, haute température sous pression pour chaudière de centrale électrique, superchauffeur

ASME SA335 P91 and P92 both belong to the ASME SA-335/SA-335M standard for high-temperature seamless ferritic alloy steel pipes, and are specialized pipe materials for high-temperature pressure equipment such as thermal power plants. P91: High-temperature superheaters, reheaters, and main steam pipelines of subcritical/supercritical boilers, and high-temperature pyrolysis units in petrochemical plants. P92: Main steam, high-temperature reheat steam pipelines, and high

Tube ASTM A179 en acier à faible teneur en carbone pour échangeur de chaleur, sans soudure, étiré à froid

A179/SA179 Low-Carbon Steel Seamless Tube, Cold-Drawn And Oiled, For Shell-And-Tube Heat Exchanger Overview A179/SA179 Low-Carbon Seamless Tube ASTM A179 / ASME SA179 carbon steel seamless tubes are specifically designed for use in heat exchangers, condensers, and similar heat transfer systems. These tubes are manufactured using a cold-drawn seamless process, providing thin walls, high precision, and excellent heat transfer performance. Made from low carbon steel, they offer

Rassemblement de tubes ASME U-Stamp avec tubes en acier au carbone SA179 et feuille de tubes SA266 Gr.2N

ASME U-Stamp Tube Bundle with SA179 Carbon Steel Tubes and SA266 Gr.2N Tube Sheet Yuhong Group Co., Ltd. is a leading Chinese enterprise specializing in the design and supply of high-quality heat exchange equipment, pressure vessels and related components. Our product range includes shell-and-tube heat exchangers, air coolers, as well as tube bundles, U-tubes, finned tubes and all supporting parts such as tube sheets, baffles, covers and flanges. Product Description ASME U

ASME SA192 tuyau en acier au carbone sans soudure tuyau de chaudière à haute résistance pour surchauffeur et mur d'eau

ASME SA209 / SA209M Gr.T1A Alloy Steel Seamless Tube Boiler Tube For Boiler,Superheater,Reheater ASME SA192 is a type of seamless carbon steel boiler tube manufactured according to ASME standards for high-pressure applications. Due to its excellent thermal conductivity and weldability, it is widely used in thermal engineering. This standard is equivalent to the ASTM A192 standard of the American Society for Testing and Materials. In engineering applications, SA192 seamless

1 2 3 4 5 Suivant