Lieu d'origine:
Chine
Nom de marque:
YUHONG
Certification:
ISO 9001-2015
Numéro de modèle:
ASTM B283 C70620
ASTM B283 C70620 CuNi 90/10 Copper Alloy Steel Flange For Marine And Offshore Engineering
| Chemical Composition (UNS C70620) | ||
| Element | Content Range (%) | Standard Reference |
| Cu (Copper) | ≥ 86.5 | ASTM B283 / UNS C70620 |
| Ni (Nickel) | 9.0 – 11.0 | ASTM B283 / UNS C70620 |
| Fe (Iron) | 1.0 – 1.8 | ASTM B283 / UNS C70620 |
| Mn (Manganese) | ≤ 1.0 | ASTM B283 / UNS C70620 |
| Zn (Zinc) | ≤ 0.50 | ASTM B283 (welding grade) |
| Pb (Lead) | ≤ 0.02 | ASTM B283 (welding grade) |
| C (Carbon) | ≤ 0.05 | ASTM B283 (welding grade) |
| P (Phosphorus) | ≤ 0.02 | ASTM B283 (welding grade) |
| S (Sulfur) | ≤ 0.02 | ASTM B283 (welding grade) |
| Mechanical Properties (ASME SB283 / ASTM B283 Standard Minimum) | |||||
| Condition | Size Range | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Standard Reference |
| Hot forged air cooled (M10) | All sizes | ≥ 276 (40 ksi) | ≥ 103 (15 ksi) | ≥ 30 | ASTM B283 |
| Hot forged air cooled (M10) | Specific cross-section | ≥ 310 (45 ksi) | ≥ 124 (18 ksi) | ≥ 30 | ASTM B283 |
| Physical Properties (Typical Values, 20°C Annealed) | ||
| Parameter | Value | Unit |
| Density | 8.89 | g/cm³ |
| Elastic Modulus | 130 | GPa |
| Thermal Conductivity (20°C) | 50.2 | W/(m·K) |
| Specific Heat Capacity | 0.38 | J/(g·K) |
| Coefficient of Linear Expansion (20-300°C) | 19 | ×10⁻⁶/K |
| Electrical Conductivity | 5 | MS/m (approx. 9% IACS) |
| Melting Range | 1100 – 1145 | °C |
| Core Differences Between C70620 and C70600 | ||
| Comparison Item | C70620 (Welding Grade) | C70600 (Standard Grade) |
| Weldability Design | Specifically designed for welding applications; standard explicitly states "intended for welding applications" | Can be used for welding, but impurity limits are less strict than C70620 |
| Impurity Control (Zn, Pb, C, P, S) | Zn ≤0.50%, Pb ≤0.02%, C ≤0.05%, P ≤0.02%, S ≤0.02% | Zn ≤1.0%, Pb ≤0.05%, relatively looser impurity control |
| Iron (Fe) Content | 1.0% – 1.8% | 1.0% – 1.8% (essentially the same) |
| Seawater Corrosion Resistance | Good (welding grade) | Good (general grade) |
| Cost | Between C70600 and high-purity nickel alloys | Lower |
Envoyez votre demande directement à nous
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
indonesia
Notation globale
Capture d'écran de notation
Voici la répartition de toutes les évaluations.Toutes les critiques